LokPilot

is the world smallest multi protocol decoder.

This decoder automatically conforms to either NMRA-DCC, Motorola, DC or even AC power!

The decoder is short circuit protected not only on the motor side but also for function outputs.

Just as the LokSound decoder, the LokPilot uses high frequency motor control and back-EMF that results in an absolute smooth and quiet running engine!

This decoder will not be obsolete! It contains a flash EPROM and can easily be updated when changes in software become available. A programmer will be available soon.

This is the only decoder that recognizes how many speed steps Your command station uses. Whether it is 14, 28 or 128 steps, the decoder adjusts itself automatically!

Specifications

Input Voltage

3.5 - 25 Volts, 32 volts for AC direction pulse.

Supported Protocol

NMRA/DCC with 14, 28 and 128 speed steps.

2/4 digit addressing

Márklin/Motorola, old and new.

Märklin, Zimo and Lenz LG100 brake generators

Analog DC and AC

Automatic recognition of protocol used. In-use switching possible.

Operations Mode Programming, F1 is F4.

Intelligent programming with 6021.

Output

1.1 Amps continuous

DC and core less motors

AC motors only with permanent magnet

15.5 kHz frequency

short circuit protect motor driver, back-EMF can be turn off.

Functions

4 function outputs, 2 of which for lighting.

140mA per output. short circuit protected

total function output: 300mA

Characteristics

Automatically selects proper speed steps

runs extremely smooth

shunting gear provided

Built to be almost indestructible!

Dimensions

1.1x0.61x0.26 in.

LokPilotDCC

in contrast to the LokPilot is not a multi protocol decoder. It is specifically designed for NMRA-DCC use only and as such has features DCC power users are asking for, such as:  programable speed table, function mapping, advanced consisting, strobe light, double strobe light, mars light, ditch light and gyra light.

Specifications

Input Voltage

3.5 - 25 Volts, 32 volts for AC direction pulse.

Supported Protocol

NMRA/DCC with 14, 28 and 128 speed steps.

2/4 digit addressing

Zimo and Lenz brake generators

Analog DC and AC

Automatic recognition of protocol used. In-use switching possible.

Operations Mode Programming

Advanced Consisting

Programable speed table

Output

1.1 Amps continuous

DC and core less motors

15.5 kHz frequency

short circuit protect motor driver, back-EMF can be turn off.

Functions

4 function outputs, 2 of which for lighting.

140mA per output. short circuit protected

Total function output: 300mA

Function mapping and FX lighting

Characteristics

Automatically selects proper speed steps

runs extremely smooth

shunting gear provided

Built to be almost indestructible!

Dimensions

1.1x0.61x0.26 in.